Commercial
Commercial & Industrial Solar Hot Water Systems
|
Rotex Products Rotex Water Tanks
Rainwater Tanks  Invest in Your Future Today
|
ROTEX Commercial / Industrial Light weight and suitable dimensions enable Sanicube hot water storage tanks to be easily incorporated into existing buildings. Therefore, large hot water storage tank systems can be connected in a modular manner to provide cost effective solutions. The Modular Heat Exchanger Storage Tank System The ROTEX Sanicube enables a very wide range of system variants. It is possible to meet the most complex demands with the different heat exchanger designs in the ROTEX Sanicube range. As a result, several heat sources can be integrated to produce additional heat extraction for a swimming pool or spas. In these cases, the whole systems usually remain relatively simple and clearly arranged and the control technology costs are generally low. In the event of a subsequent change in the performance requirements, the system can often be modified very easily and flexibly without having to increase or decrease the number of Sanicubes owing to the modular layout. Applications The calculation of the required number of Sanicube hot water storage tanks and the corresponding total heating output depends on the required maximum withdrawal quantity (withdrawal per unit of time) and on the withdrawal profile based on the dimensioning. Inside large widely dispersed buildings, it can also often be worthwhile to distribute several Sanicube storage tanks decentralised outside the building and to install them as close as possible to the consumers, thereby minimising heat losses and saving on pumps and expensive pipelines. Hotels or hospitals often require large volumes of hot water instantly. The volume of heat stored in the ROTEX Sanicube is so large that a momentary increase in demand can be covered, even if the recharging output of the heat generator is comparatively small. Short-term hot water output for each Sanicube unit therefore does not depend on the output of the heat generator to any great extent. If several Sanicube hot water heat exchanger storage tanks are connected to each other in a large system, the outputs of the individual storage tanks are added to each other. Recent Articles
Upcoming Events Optimum Design = Efficiency |
|||
Rotex Sanicubes
Rotex Monopex